Jeanie Fitzgerald
Quiz by , created more than 1 year ago

Technician

64
1
0
eric rinehart
Created by eric rinehart almost 10 years ago
eric rinehart
Copied by eric rinehart almost 10 years ago
eric rinehart
Copied by eric rinehart almost 10 years ago
Jeanie Fitzgerald
Copied by Jeanie Fitzgerald over 8 years ago
Close

8 Bonding and Grounding

Question 1 of 28

1

This is the establishment of a reference for the electrical power source (AC or DC), electrical equipment or both

Select one of the following:

  • Grounding

  • Bonding

  • Electrode System

Explanation

Question 2 of 28

1

All metal pathways must be bonded at both ends regardless of length when containing a bonding conductor?

Select one of the following:

  • True
  • False

Explanation

Question 3 of 28

1

This is the copper conductor that interconnects the PBB to SBB

Select one of the following:

  • TBB

  • GEC

  • TEBC

  • ACEG

Explanation

Question 4 of 28

1

What is the recommended maximum value for the bonding resistance between any 2 points where bonding exists

Select one of the following:

  • 0.1 Ohms

  • 1 Ohm

  • 10 Ohms

  • 0.01 Ohms

Explanation

Question 5 of 28

1

This type of protector is used to protect against sneak current

Select one of the following:

  • Primary

  • Secondary

  • Data & Fire Alarm

  • Carbon

Explanation

Question 6 of 28

1

This type of protector has a reaction time of 3-5ns

Select one of the following:

  • Gas

  • Carbon

  • Solid State

  • Primary

Explanation

Question 7 of 28

1

The primary responsibility of the ___________ is safeguarding personnel, property and equipment from foreign electrical voltages and current

Select one of the following:

  • ITS Installer

  • Qualified Electrican

Explanation

Question 8 of 28

1

List 3 distinct, yet interconnected grounding systems (Select all correct)

Select one or more of the following:

  • AC Grounding Electrode System

  • Equipment Grounding System

  • Telecommunications Bonding Infrastructure

  • Supplemental Ground System

Explanation

Question 9 of 28

1

These are to be installed on exposed circuits as near as possible to the point at which the exposed cables enter the bulding

Select one of the following:

  • Primary Protection

  • Secondary Protection

  • Data & Fire Alarm Protector

Explanation

Question 10 of 28

1

This type of protector has a reaction time of 15ns or more

Select one of the following:

  • Gas tubes

  • Solid state

  • Carbon blocks

Explanation

Question 11 of 28

1

Standards such as TIA-607-C recommend This be made on every 3rd floor and top floor of a multi-story building.

Select one of the following:

  • BBC

  • TEBC

  • GEC

Explanation

Question 12 of 28

1

This serves as the dedicated extension of the building AC grounding electrode system of the telecommunications infrastructure

Select one of the following:

  • PBB

  • SBB

  • GEC

  • ACEG

Explanation

Question 13 of 28

1

This is the grounding connection point for telecommunications systems and equipment in the area served by a TR

Select one of the following:

  • GEC

  • SBB

  • PBB

  • BCT

Explanation

Question 14 of 28

1

This is the copper conductor that interconnects the PBB to SBB and is a minimum # 6 AWG copper conductor.

Select one of the following:

  • TBB

  • GEC

  • BBC

  • ACEG

Explanation

Question 15 of 28

1

How far does the conductor need to extend beyond the connector if using a set-screw, pass-through style lug

Select one of the following:

  • .5 in

  • .25 in

  • .12 in

Explanation

Question 16 of 28

1

This type of protector has a reaction time of 10-15 ns

Select one of the following:

  • Gas

  • Carbon

  • Solid state

  • Fire & data

Explanation

Question 17 of 28

1

What is the maximum amount of exposure between the insulation and the bonding connector

Select one of the following:

  • 1/8"

  • 1/16"

  • flush

Explanation

Question 18 of 28

1

Interbuilding circuits are considered to have lightning exposure unless 1 or more conditions exist (select all correct)

Select one or more of the following:

  • Buildings close together and sufficiently high

  • Cable run is 140ft or less (underground or in conduit)

  • Area having an avg. of 5 or fewer t-storms per year and earth resistivity less than 100 ohms

Explanation

Question 19 of 28

1

This type of protector has a reaction time of 1-2 ns

Select one of the following:

  • fire & data

  • carbon

  • gas

  • solid state

Explanation

Question 20 of 28

1

The connection intended to safely and effectively equalize the potential differences between two metallic items.

Select one of the following:

  • Bonding

  • Grounding

Explanation

Question 21 of 28

1

The following distinct yet interconnected grounding systems should be in place at every site:

Select one or more of the following:

  • The AC grounding electrode system

  • Equipment grounding system

  • Supplemental grounding system

  • Telecommunications bonding system

Explanation

Question 22 of 28

1

A primary bonding busbar (PBB) serves as the dedicated extension of the building grounding electrode systems for telecommunications bonding infrastructure.
Check all that apply

Select one or more of the following:

  • Was formerly referred to as Telecommunication main grounding busbar ( TMGB )

  • Located in the entrance facility (EF) but placed to minimize the length of the telecommunications bonding conductor ( TBC ) from the PBB to the grounding electrode system

  • A minimum of 4 inches in height

  • Have an isolated mount and a minimum of 2 inch clearance behind the busbar

Explanation

Question 23 of 28

1

The grounding equalizer ( GE ) is now referred to as backbone bonding conductor ( BBC ) , is an insulated stranded conductor with a minimum size of 6 AWG

Select one of the following:

  • True
  • False

Explanation

Question 24 of 28

1

ISO/IEC 30129 was published in 2015 specifically for telecommunications bonding infrastructure as an international standard.

Select one of the following:

  • True
  • False

Explanation

Question 25 of 28

1

A primary responsibility of the qualified electrician is safeguarding personnel, property and equipment from voltages or currents not expected.

Select one of the following:

  • True
  • False

Explanation

Question 26 of 28

1

NFPA 70 is the current codes and standards from the National Electrical Code ( NEC )

Select one of the following:

  • True
  • False

Explanation

Question 27 of 28

1

Which of the following apply to telecommunications bonding and grounding

Check all that apply

Select one or more of the following:

  • NEC article 800

  • ANSI/TIA 607-C

  • ISO/IEC 30129

Explanation

Question 28 of 28

1

The establishment of a reference for the electrical power source ( AC, DC ), the electrical equipment or both

Select one of the following:

  • Bonding

  • Grounding

Explanation

Previous
Check answer
Next